May
30
Sat
CAD Course
May 30 @ 09:00 – 16:00

THE CAD COURSE IS NOW FULL. CONTACT DANNY DIRECTLY WITH QUESTIONS OR CONCERNS. 

 

The course will run Saturday, May 30th from 9:00-4:00 with a break for lunch

The course will be in Solidworks and goes over an introduction to 3D modeling, best practices, and tools relevant to users at Protospace. The course will cost 25$.

There will be an online signup form located at http://protospace.ca/cad/. (the signup link will go live tomorrow) Your signup will NOT be confirmed until you have paid the 25$ minimum donation for the course. If your signup is not confirmed your spot may be bumped. Confirmation can be done in person or via paypal or interac E-transfer to iamnemo222@gmail.com

Signup will be caped at 12 people.

The CAD course is a prerequisite for the CAM course on the tormach if you do not already have experience in 3D CAD. If you are interested in taking the CAM course and training on the Tormach it is highly recommended you take this course as well.

Software day will be held on Tuesday, the 19th during the open house. Getting SolidWorks running can be a multi-hour affair and will NOT be done the day of the class. If you do not have SW running at the start of the class you will be left behind. you are not required to attend Software day, it is for people who would like help getting everything running. you are responsible for your own copy of SolidWorks as it will not be provided, please contact Danny if you have questions regarding this.

Any other questions, e-mail Danny.

Tormach and CAM training will be July 13th.

CAD Course Sign-up

Jun
2
Tue
Meet & Geek – Our Weekly Open House
Jun 2 @ 19:00 – 22:00

Our public night at the space, happens every Tuesday at 7pm.

Come out and meet the artists, tinkerers and technologists that make up Protospace while refining your own project ideas.

While membership to Protospace is $50 a month, our Meet&Geek nights are free.

Jun
9
Tue
Meet & Geek – Our Weekly Open House
Jun 9 @ 19:00 – 22:00

Our public night at the space, happens every Tuesday at 7pm.

Come out and meet the artists, tinkerers and technologists that make up Protospace while refining your own project ideas.

While membership to Protospace is $50 a month, our Meet&Geek nights are free.

Jun
13
Sat
Monthly Members Meeting
Jun 13 @ 14:00 – 16:00

This is the regularly scheduled member’s meeting. Agenda and additional information is discussing in the protospace-administration forum.

Jun
16
Tue
Meet & Geek – Our Weekly Open House
Jun 16 @ 19:00 – 22:00

Our public night at the space, happens every Tuesday at 7pm.

Come out and meet the artists, tinkerers and technologists that make up Protospace while refining your own project ideas.

While membership to Protospace is $50 a month, our Meet&Geek nights are free.

Jun
23
Tue
Meet & Geek – Our Weekly Open House
Jun 23 @ 19:00 – 22:00

Our public night at the space, happens every Tuesday at 7pm.

Come out and meet the artists, tinkerers and technologists that make up Protospace while refining your own project ideas.

While membership to Protospace is $50 a month, our Meet&Geek nights are free.

Jun
30
Tue
Meet & Geek – Our Weekly Open House
Jun 30 @ 19:00 – 22:00

Our public night at the space, happens every Tuesday at 7pm.

Come out and meet the artists, tinkerers and technologists that make up Protospace while refining your own project ideas.

While membership to Protospace is $50 a month, our Meet&Geek nights are free.

Jul
7
Tue
Meet & Geek – Our Weekly Open House
Jul 7 @ 19:00 – 22:00

Our public night at the space, happens every Tuesday at 7pm.

Come out and meet the artists, tinkerers and technologists that make up Protospace while refining your own project ideas.

While membership to Protospace is $50 a month, our Meet&Geek nights are free.

Jul
11
Sat
Monthly Members Meeting
Jul 11 @ 14:00 – 16:00

This is the regularly scheduled member’s meeting. Agenda and additional information is discussing in the protospace-administration forum.

Jul
13
Mon
CAM Course (Tormach)
Jul 13 @ 10:00 – 16:00

Training for the Tormach consists of two parts.

The first part is using CAM which is the software used to generate programs for the CNC mill. You have two options in software to use in this course you can use either:

  • Fusion 360, or
  • HSMWorks express for SolidWorks.

SolidWorks and the CAD course will NOT be a prerequisite for the course. Fusion 360 can be downloaded and installed for free from Autodesk. If you are using Fusion 360 please complete some of the tutorials and have a good understanding of how to use the programs. Being unable to use the program at the start of the course will require you having to re-take it before continuing. HSMWorks Express is a free Add-in for SolidWorks and is functionally identical to the CAM used by Fusion 360. If you plan on using HSMWorks, attending the CAD course in SolidWorks is required.

All members must have completed lathe training. If you are on the list to attend lathe training but have not yet completed it you may attend but will not be able to do the practical cut part of the course until after you have completed the lathe training. If the course is full, members without lathe training may be bumped for members who have completed it. This course is only available to vetted members.

The second part of the course consists of using Mach 3 and the Tormach itself including start up, the practical cut where you will make a set of sacrificial jaws followed by cleanup and shut down. This will be schedule in pairs AFTER completing the course and will take about 3-4 hours per pair.

The cost of the course is 30$ to cover the cost of material for the project, a 3/8″ 2 flute end-mill, yours to keep + 1 coffee (lg, 1c1sw) , Due at the start of the practical portion of the course. Further coffee may be required as payment to supervise/help out with your first job on your own project. Due to the amount of information covered and the exorbitantly high cost of a major mistake it is STRONGLY recommended (read: mandatory) that your first job or two done on the Tormach is checked over and supervised until you have gained confidence on the workflow of the machine.

The course will be capped at 12 people, with signup closing on July 10th, after which no new people will be accepted

Any questions, please contact Danny or reply to the thread on the admin group.

CAM (Tormach) Course Sign-up

Jul
14
Tue
Meet & Geek – Our Weekly Open House
Jul 14 @ 19:00 – 22:00

Our public night at the space, happens every Tuesday at 7pm.

Come out and meet the artists, tinkerers and technologists that make up Protospace while refining your own project ideas.

While membership to Protospace is $50 a month, our Meet&Geek nights are free.

Jul
21
Tue
Meet & Geek – Our Weekly Open House
Jul 21 @ 19:00 – 22:00

Our public night at the space, happens every Tuesday at 7pm.

Come out and meet the artists, tinkerers and technologists that make up Protospace while refining your own project ideas.

While membership to Protospace is $50 a month, our Meet&Geek nights are free.

Jul
28
Tue
Meet & Geek – Our Weekly Open House
Jul 28 @ 19:00 – 22:00

Our public night at the space, happens every Tuesday at 7pm.

Come out and meet the artists, tinkerers and technologists that make up Protospace while refining your own project ideas.

While membership to Protospace is $50 a month, our Meet&Geek nights are free.

Aug
4
Tue
Meet & Geek – Our Weekly Open House
Aug 4 @ 19:00 – 22:00

Our public night at the space, happens every Tuesday at 7pm.

Come out and meet the artists, tinkerers and technologists that make up Protospace while refining your own project ideas.

While membership to Protospace is $50 a month, our Meet&Geek nights are free.

Aug
8
Sat
Monthly Members Meeting
Aug 8 @ 14:00 – 16:00

This is the regularly scheduled member’s meeting. Agenda and additional information is discussing in the protospace-administration forum.

Aug
11
Tue
Meet & Geek – Our Weekly Open House
Aug 11 @ 19:00 – 22:00

Our public night at the space, happens every Tuesday at 7pm.

Come out and meet the artists, tinkerers and technologists that make up Protospace while refining your own project ideas.

While membership to Protospace is $50 a month, our Meet&Geek nights are free.

Aug
18
Tue
Meet & Geek – Our Weekly Open House
Aug 18 @ 19:00 – 22:00

Our public night at the space, happens every Tuesday at 7pm.

Come out and meet the artists, tinkerers and technologists that make up Protospace while refining your own project ideas.

While membership to Protospace is $50 a month, our Meet&Geek nights are free.

Aug
25
Tue
Meet & Geek – Our Weekly Open House
Aug 25 @ 19:00 – 22:00

Our public night at the space, happens every Tuesday at 7pm.

Come out and meet the artists, tinkerers and technologists that make up Protospace while refining your own project ideas.

While membership to Protospace is $50 a month, our Meet&Geek nights are free.

Sep
1
Tue
Meet & Geek – Our Weekly Open House
Sep 1 @ 19:00 – 22:00

Our public night at the space, happens every Tuesday at 7pm.

Come out and meet the artists, tinkerers and technologists that make up Protospace while refining your own project ideas.

While membership to Protospace is $50 a month, our Meet&Geek nights are free.

Sep
8
Tue
Meet & Geek – Our Weekly Open House
Sep 8 @ 19:00 – 22:00

Our public night at the space, happens every Tuesday at 7pm.

Come out and meet the artists, tinkerers and technologists that make up Protospace while refining your own project ideas.

While membership to Protospace is $50 a month, our Meet&Geek nights are free.